E-09 EPSON 爱普生原装板
Applies to: 写真机 / 热升华（爱普生原装板） · Firmware: OEM v4.x
What the customer sees
Two LEDs flash alternately, showing 'Service required' (waste-ink pad counter full).
Most likely causes (ranked)
90% Waste-ink counter reached its limit
10% Waste pad actually saturated / leaking
4 steps the customer can do
1
Record the machine model and serial number.
2
Photograph the alternating LED state.
3
Reduce cleaning frequency while waiting.
4
Contact a technician for reset and inspection.
3 technician steps
1
Clean or replace the waste-ink pad.
2
Reset the counter with official tools.
3
Check the waste pump and tubing.
3 customer prohibitions
Related parts: 废墨垫 / 废墨泵
Start step-by-step diagnosis from this code →Contact an online technician (Human-Gate PENDING)← Error Codes
High-risk actions enter the Human-Gate queue and are never auto-executed.